Connecting your PilotAware to RunwayHD

Step 1

Start up the RunwayHD app on your mobile device, it will bring up this screen.
Once the app has loaded, click the “cog” on the top of the page. This will bring up the settings list.

Step 2

Select “Flarm”
Select “Enable FLARM” to enable it.
Select “Altitude Filter’s” box and enter 40000 (for testing). This can be changed later to decrease traffic at levels you’re not interested in).
Select “Use FLARM for GPS” to enable it.
Select “PilotAware” to activate it.
Scroll the page down past “PilotAware”

Step 3

Select the IP Address box and enter: 
Tap the “Port” box and enter: 2000 
Tap the Passcode box and enter: 6001 
Return to the main display.

Step 4

If you have followed all of the previous steps, the screen should look like this.

Step 5

If you have poor GPS reception you will see this and if you loose WiFi connection then you will see this notice: